橡胶软接头漏水的最大的原因应该是因为设备不精确。近一些客户反响橡胶软接头产品在设备和试运行会有漏水现象，出厂前都是经过压力测验和紧密关闭性试验测验，契合规范后才会出售到客户手中。上海松夏减震器有限公司的技能担担任职务务的人觉得设备运用有误，可曲挠橡胶软接头在法兰联接过程中使用可曲挠橡胶软接头本身橡胶端面的杰出橡胶边际作为紧密关闭资料来紧密关闭橡胶软接头法兰端面，所以相同在扣槽橡胶软接头容易发生漏水现象，端面全紧密关闭橡胶软接头不会有这种现象，首要原因是扣槽橡胶软接头设备时间没有很好的将橡胶紧密关闭端面很好的卡进法兰的凹槽中，这样橡可曲挠橡胶软接头在运用过程中容易发生部分压力会集在边际处显露出来走漏。在可曲挠橡胶软接头设备过程中有必要使橡胶边际卡扣到到法兰槽里，所以设备后反法兰能够很紧密关闭的卡住橡胶端好，运用中不会呈现渗漏现象。当有部分的设备作业，螺钉不走漏，这是不精确的紧密关闭面走漏后，拧紧螺钉将损坏橡胶边际，使紧密关闭面损害，橡胶球的外表的一小批遭到损坏。这种办法是不精确的，我厂走漏，该橡胶软接头卸下被复原，之后调整设备。
The biggest cause of rubber joint leakage should be due to inaccurate installation.Recently, some customers reported that there would be water leakage in the installation and trial operation of rubber joint products. Before leaving the factory, they all passed the pressure test and tight sealing test, and were sold to customers after meeting the standards.Pine xia shock absorber co., LTD. Shanghai technical bear positions of people think that using the wrong installation, in a flexible rubber joint used in the process of flange connection in a flexible rubber joint of rubber face own outstanding rubber edge to tightly closed as tightly closed material rubber soft joint flange end face, so the same accounting groove soft rubber joints are prone to leakage phenomenon, face all tightly closed soft rubber joints will not have this kind of phenomenon, the main reason is that buckle slot will be a very good rubber joint installation moments don't have rubber tightly closed end face good card into the groove of the flange,This flexible rubber joints in the use of the process is prone to part of the pressure concentrated on the edge of the exposed leak.In the installation process of flexible rubber joint, it is necessary to make the rubber edge buckle into the flange slot, so the anti-flange can be very close to the stuck rubber end after installation, there will be no leakage in use.When there is part of the installation work, the screw does not leak, which is inaccurate tight sealing surface leakage, tighten the screw will crush the rubber edge, so that the tight sealing surface damage, rubber ball surface of a small batch of damage.This method is not accurate, I plant leakage, the rubber soft joint was removed after the reduction of the adjustment device.
